Tableau Tolerance Iso 2768

Table 1. Permissible deviations for linear dimensions except chamfered parts (external radii and chamfer heights, see Table 2.) Unit : mm Tolerance class
Designation
Division of basic dimension 0.5 (1)
Over 3
Over 6
Over
Over
Over
Over
Over
up to 3
up to 6
up to
30 up
120 up
400 up
1000
2000
30
to 120
to 400
to
up to
up to
1000
2000
4000
Description
Permissible deviations f
fine
0.05
0.05
0.1
0.15
0.2
0.3
0.5
-
m
medium
0.1
0.1
0.2
0.3
0.5
0.8
1.2
2
c
coarse
0.2
0.3
0.5
0.8
1.2
2
3
4
v
very coarse
-
0.5
1
1.5
2.5
4
6
8
Note (1) :
For basic dimensions below 0.5 mm, the deviations shall be indicated adjacent to the relevant basic dimension(s).
Table 2. Permissible deviations for linear dimensions of chamfered parts (Rounding of corner and chamfered dimension) Unit : mm Tolerance class
Division of basic dimension
Designation
Description
0.5 (1)
Over 3
up to 3
up to 6
Over 6
Permissible deviations
Note (1) :
f
fine
m
medium
c
coarse
v
very coarse
0.2
0.5
1
0.4
1
2
For basic dimensions below 0.5 mm, the deviations shall be indicated adjacent to the relevant basic dimension(s).
Table 3. Permissible deviations for angular deviations
Tolerance class
Deviation of length (unit : mm) of the shorter side of the angle concerned Up to 10
Designation
Description
Over 10
Over 50
Over 120
up to 50
up to 120
up to 400
Over 400
Permissible deviations f
fine
m
medium
c v
1°
30c
20c
10c
5c
coarse
1°30c
1°
30c
15c
10c
very coarse
3°
2°
1°
30c
20c
Table 4. General tolerances on straightness and flatness Unit : mm Straightness and flatness tolerances for ranges of nominal lengths Tolerance
Up to 10
class
Over 10
Over 30
Over 100
Over 300
Over 1000
up to 30
up to 100
up to 300
up to 1000
up to 3000
General tolerances on straightness and flatness H
0.02
0.05
0.1
0.2
0.3
0.4
K
0.05
0.1
0.2
0.4
0.6
0.8
L
0.1
0.2
0.4
0.8
1.2
1.6
Table 5. General tolerances on perpendicularity Unit : mm Perpendicularity tolerances for ranges of nominal lengths of the shorter side Tolerance class
Up to 100
Over 100
Over 300
Over 1000
up to 300
up to 1000
up to 3000
General tolerances on perpendicularity H
0.2
0.3
0.4
0.5
K
0.4
0.6
0.8
1
L
0.6
1
1.5
2
Table 6. General tolerances on symmetry Unit : mm Symmetry tolerances for ranges of nominal length Tolerance
Up to 100
class
Over 100
Over 300
Over 1000
up to 300
up to 1000
up to 3000
General tolerances on symmetry H
0.5
K L
0.6 0.6
1
0.8
1
1.5
2
Table 7. General tolerances on circular run-out Unit : mm Tolerance class
Circular run-out tolerance
H
0.1
K
0.2
L
0.5

Tableau Tolerance Iso 2768

General Tolerances to DIN ISO 2768.The latest DIN standard sheet version applies to all parts made to DIN standards.Variations on dimensions without tolerance values are according to 'DIN ISO 2768- mk'. GENERAL TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS (DIN ISO 2768 T1). ISO 2768 and derivative geometrical tolerance standards are intendedto simplify drawing specifications for mechanical tolerances. ISO 2768 is mainly for parts that are manufactured by way of machining or removal of materials.

Iso 2768 Tolerance Table